What are you looking for?
自动修复防弹板
| 弹性十足，抗冲击性强且经久耐用 |
| 降低子弹撞击声 |
| 铅粉尘控制与更优吸附 |
| 射击台的安全设备 |
格式
- 面板
- 提供红色和黑色两种颜色。
- 其他颜色和宽度可按要求定制。
| Min | Max | |
| Width | 700 mm | 700 mm |
| Thickness | 7 mm | 10 mm 并 10 mm 加强。 |
| Length | 20 m | 20 m |
关于Ballistiflex
Ballistiflex是一种柔性聚氯乙烯材料，专为射击场防反弹条设计。当弹丸穿透Ballistiflex时，其速度和动能会显著降低。子弹产生的热量促使穿孔迅速闭合，彰显该材料的独特性能。即使在同一位置遭受多次撞击，Ballistiflex仍能实现自我修复。
这种创新材料不仅能吸收并消散子弹的动能，还能防止弹丸从后壁反弹。当子弹反弹时，该材料会将其拦截，确保其不会再次穿透。这是因为弹丸在初次穿过材料时已消耗大部分动能，从而通过阻止弹丸返回射击区域来提升安全性。
Ballistiflex有助于降低子弹撞击时的噪音水平，并能将铅尘限制在子弹捕集器内，从而实现更佳的排气效果。
产品用途
五金件
为何选择Ballistiflex？
安全是射击场的第一要务，必须严格遵守规则和预防措施，以保护射手及其他人员免受危险弹丸的伤害。
Ballistiflex作为高效的防反弹幕布，被广泛应用于射击场，有效防止子弹从后墙反弹回射手方向。
常见应用场景：
- 警务培训设施
- 室内射击场
- 枪支许可办理场所
- 军事训练基地
- 室外射击场
防止弹跳
Ballistiflex通过形成屏障阻止弹丸反弹至射击者方向，从而保障安全。该屏障能削弱弹丸动能，有效防止弹跳或反弹。即使低动能弹跳也无法再次穿透PVC材料，持续维持安全环境。
防止弹片和灰尘
Ballistiflex采用柔性PVC材质，能有效吸收弹丸能量，防止其碎裂，从而最大限度减少弹片和弹道粉尘。该PVC材料还能捕获弹丸粉尘，保持射击场清洁安全。
减少噪音污染
Ballistiflex通过减缓弹丸速度并采用软质PVC材料，有效降低射击场噪音污染。其兼具隔音屏障功能，可消除回声并减少35分贝的声波传播，既保障射手听觉安全，又最大限度减少对周边环境的干扰。
弹性柔韧特性
Ballistiflex具备自修复能力，可闭合弹丸造成的破损。当弹丸穿透PVC材料时产生的热量会促使材料熔合闭合，即使经受多次冲击仍能保持密封性，从而确保材料的耐久性与更长的使用寿命。
Technical Datasheet
| Properties | Standard | Unit | Value | Description |
| Shore A hardness | EN ISO 868 | Sh A | 76 | Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard). |
| Tearing resistance | DIN 53515 | N/mm | 32 | Minimum tensile stress required to tear a pre-slit sample. |
| Tensile strength at break | ASTM D 638 EN ISO 527 | N/mm² | 13 | Maximum tensile stress that a material can be subjected to before break. |
| Elongation at break | % | 370 | Elongation of the specimen at the break point under tensile stress. | |
| Residual elong. (after break) | % | 72 | Permanent elongation of the specimen measured after rupture in a tensile test. | |
| Thermal conductivity | ASTM C 177 | W/m.K | 0,16 | Ability to conduct heat. The Lower it is, the more insulation. |
| Vicat softening temp. | EN ISO 306 | °C | 48 | Temperature at which the specimen is penetrated to a depth of 1 mm by a 1 kg flat indenter of 1 sq. mm. |
| Specific heat capacity | ISO 11357 | kJ/kg.K | 1,6 | Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius. |
| Sound reduction | DIN 52210 | dB | >35 | Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain. |
| Reaction to fire | EN 13501-1:2007 | - | - | Standard classifications of material self-extinguishing and resistance to combustion. |
| Light transmittance | ASTM D 1003 | % | 0 | Visible light rate transmitted through the material. |
| UV resistance | ISO4892 | - | Yes | Ability to resist to UV (Sun, welding arc). |
| Surface resistivity | ASTM D257 | .1010 Ω/□ | 3 | Material surface electric resistivity measured with a 100 V direct voltage. |
| Water absorption | EN ISO 62 | % | -0,2 | Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed) |
| Density | ASTM D 792 | g/cm3 | 1,18 | Mass per unit volume. |
The data contained in this technical specification is given for information only and is based on our current knowledge of the products concerned.
This information given to our customer in good faith to inform him and to help him in his search, does not constitute any formal or implicit guarantees as to its use.